Designed to open bags in different sizes. Solid waste comes to the bag opener after pre-separation. Open the bags without shredding the waste in them. The performance is between 90 – 95%. Depending on the capacity need, it is produced in our facility in various sizes. It prevents the system from stopping by returning in the event of a jam. It is an efficient product, electricity consumtion of which is minimized via SG Technology.
It is used to separate the solid waste based on their types in the solid waste separation process. Chimney numbers and sizes are designed separately based on the capacity. Collection band speed is designed to allow adjustment based on the capacity. Products are used in transport platforms and walkways according to DIN norms.
Ballistic separators are the systems that are used to separate paper, carton, cardboard etc that are expressed as 2 dimensional and pet bottle, can coke bottles etc. that are expressed as 3 dimensional and materials that are smaller than a certain scale.
Separation process is conducted in three ways as follows: whole parts with high density, in short 3 dimensional materials to the lower part with the movement of the pallet, flat parts with low density, in short 2 dimensional materials to the upper part, parts smaller than a certain scale in general to the bottom side through the holes on the pallets.
They are produced in various sized depending on the capacity.
B A S® Eddy Current non-ferrous metal separators are used for the separation of non-ferromagnetic metals. Eddy current separators create eddy current on the magnetic drum as the magnetic, drum lined up in a certain fraction, rotates in its own axis at a certain speed. With this current, the non-ferrous materials that come with a certain speed, enter into that area and accelerate and thrown out of flow. With this method, the non-ferrous materials are separated from other materials.
Baling is the process of compressing and baling the paper, cardboard, pet, plastic, aluminum and similar waste groups that will be put on the market for commercial purposes in the Recycling Industry so that they would not take up space and to be transported easily.
In our production, horizontal and vertical baling machines are produced based on the need, product and capacity. Our baling machines are produced horizontally and vertically based on customer needs.
It is used in separation industry for sieving a wide variety of products. Sieves are also produced in stainless steel. In this way, it becomes suitable for the production of food and medical products. With the hole size opened in any desired diameter, it is possible to sieve all kinds of products. The sieves are not fixed to the body and can be removed and assembled in a very short time.
B A S® Electromagnetic over-belt metal separators are used to remove unwanted hard metals in conveyors and chutes. Over-belt metal separators consist of main magnetic block, infinite separator band, motor and magnetic insulated steel chassis main components.
